国产精品一区天堂,国产亚洲精品久久久久久国模美 ,97精品人人妻人人

BYD's new lithium-ion forklift sales ranking list-

Step 7: Reverse and leave the working position

Electric forklifts are substantially different from traditional internal combustion forklifts in terms of power, so their operating procedures are also somewhat different

Starting from the handle, the design of the truck is in line with the ergonomic handle to meet the load requirements of 1-5 tons

Changing lead-acid battery forklifts to lithium battery forklifts is not a simple battery conversion Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable The use of 5G networks provides strong technical support for the popularization and improvement of factory automation

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

When the road surface is uneven and has a slope, it will cause serious wear and tear on the wheels and motor of the 3-ton electric forklift

To prevent this problem, truck manufacturers recommend that you try to avoid overcharging, monitor the temperature of the electrolyte during charging, and do not use electrolytes with too high a relative density

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

Try to turn slowly

At present, many domestic forklift host companies have begun to consciously carry out product series work

More environmentally friendly, no corrosion, lead-free, safe to use, and can be recycled even when its service life is up

BYD's new lithium-ion forklift sales ranking list- So what are the advantages of electric forklifts? Let's take a look: 1

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force

Electric transport trucks are time-saving, labor-saving, cost-saving, and highly efficient Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment Hazardous characteristics

The ergonomically designed control handle of the electric transport truck is convenient for left-handed operation and improves driving comfort

Increase the stacking height and improve the utilization rate of stacking space If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation (2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

The operation and control of electric forklifts are relatively simple and flexible

7 Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions 2 The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

When performing fill welding, it is recommended to use DC reverse polarity arc welding

BYD's new lithium-ion forklift sales ranking list-

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

In this regard, the customer had tried to install only a single-motor drive axle, but this did not solve the problem because the single-motor drive could not reach the same power level as a traditional internal combustion forklift

Therefore, the competition among manufacturers in the current market is also fierce

What should we do if the electric pallet truck makes an unusual noise? The truck manufacturer will tell you about it

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded

How to choose a second-hand forklift 1

If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle

Avoid using in blind areas; 9

Starting, stopping or changing movement should be slow, as sudden movement may cause danger

In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

At present, BYD forklifts have been widely used in industries such as food and beverage, papermaking, feed, automobiles and parts, home appliances and logistics, and are committed to improving logistics and handling efficiency, optimizing resource allocation, saving logistics and handling costs, and creating higher benefits for various industries

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

熟女人妻国产精品-欧美老妇与zozoz0交-99久久久无码国产aaa精品-怡春院久久国语视频免费-亚洲精品卡2卡三卡4卡2卡乱码

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info